Boat Guides

The Tie Down Marine Bunk Board Guide-Ons are black, 2x4 carpeted bunk boards that are sold in pairs that will include all of the galvanized mounting hardware. The posts can be attached 5-11 inch on the side of the frame. If these posts are put above the frame, the bunk placement is 19 inches high. The U-bolts and nuts are plated in zinc. The kit frames 2-3 inches wide and 4 inches high.

Non-marring PVC post helps guide the boat safely onto the trailer and gives a visual aid when backing an empty trailer. The 13-degree slant post provides a wider target when loading the boat. Metal bracing runs 15 inches into the pipe, adding strength and impact resistance. All mounting hardware included.

Tie Down marine bunk board guide-ons are black, 2x4 carpeted bunk boards that are sold in pairs that will include all of the galvanized mounting hardware. The posts can be attached 5-11 inches on the side of the frame. If these posts are put above the frame, the bunk placement is 19 inches high. The U-bolts and nuts are plated in zinc. The kit frames 2-3 inches wide and 4 inches high.

Guides adapt to most tube and channel trailer frames. Galvanized for long-lasting protection and include heavy-duty steel component parts. Bright orange end caps on these PVC guides provide a visible target when loading your boat. Boat guides are 48 inches high with up to 16 inches of side adjustment. All mounting hardware is included.

Heavy-duty, trailer-mounted guideposts are designed to assist in loading larger pontoon boats in rough water or high winds. Posts are hot dip galvanized 2.5 inch square steel, covered with molded PVC material. Designed to mount on the trailer between the pontoons. Mounts to trailer cross members 2 inches wide by 2-3 inches high. All mounting hardware is included.

These 13-inch rubber rollers mount on top or beneath the frame for precise placement. The galvanized guide mount tubes can be adjusted up to 13 inches in width on each side. Brackets and hardware fit trailer frame rails up to 2 inches wide and 2 inch, 3 inch and 4 inch in height. Sold in pairs with all mounting hardware included.

Non-marring PVC post helps guide the boat safely onto the trailer and gives a visual aid when backing an empty trailer. The 13 degree slant post provides a wider target when loading the boat. Metal bracing runs 15 inches into the pipe, adding strength and impact resistance. All mounting hardware included.

Tie Down's roller guides angles adjust to fit the angle of your boats' hull, helping safely center the boat for trailering. This roller guide provides up to 16 inches of adjustment (8 inches on each side) to fit the specific angle of your hull. The guide includes hot dip galvanized steel components with a one-piece adjustable clamp and U-bolt. Designed to fit all channel and tube frames up to 5 inches.

Boat guides help you visually guide your boat onto your trailer. High-strength super gripper mounting brackets attach firmly above and below the trailer frame. Easy bolt-on mounting fits trailer frames up to 3" x 5" high. Adjustable to provide optimum fit to any hull design.

Pontoon trailer guides aid in loading the boat onto the trailer by raising up 12 inches when the trailer is submerged. Bright orange end caps on these PVC guides give you a brighter target when loading. These guides are designed to be mounted between the pontoons. Made of 1.5 inch square, 16 gauge steel galvanized tubing and covered by 2 inch x 20 inch PVC pipe. Mounts to trailer cross members 2 inch wide by 2, 3, or 4 inches high. All mounting hardware is included.