Tie Down Engineering

Replace your noisy chains with self-coiling hitch cables from Tie Down. Available un-coated or vinyl coated. Both use durable galvanized aircraft cable construction. Hitch cables exceed SAE J684 standards for trailer coupling and automotive type hitches. Each pair extends 36 inches in length.

For use with trailer suspension spring hanger brackets. Fluting prevents the bolt from turning, which can cause wear to the hanger brackets. Zinc plated Grade 5 steel. 9/16 inch x 3 inch bolts with nuts. 2 per pack. Includes (2) 9/16 inch zinc plated fluted shackle bolts and (2) nuts for trailer spring hanger brackets.

Tie Down Engineering 3-inch x 16-inch bunk slicks screw directly onto carpeted bunk boards to allow the boat to gently slide on or off the trailer. Ten pieces per pack.

Galvanized 11 gauge steel roller panel bracket for mounting 10 inch keel roller.

Includes (2) zinc plated 1/2 inch square U-bolts, (4) flatwashers, and (4) nyloc nuts to mount brackets to trailer frame.

Designed to support 2 x 4 wood bunks, 2 x 6 wood bunks, or Tie-Down Engineering's roller bunks on boat trailers. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity. Hot dip galvanized for lasting protection.

Includes (1) zinc plated 7/16 inch square U-bolts, (2) flatwashers, and (2) nyloc nuts to mount brackets to trailer frame.

The Tie Down Engineering dock system inside roller ramp bracket is used to create custom dock setups. These components are commercial-grade 1/4 inch thick galvanized steel and includes both the left and right ramp brackets.

Self-centering bunk glide on's make launching and loading effortless without damaging the hull of painted, fiberglass, or aluminum boats.

Galvanized roller panel bracket assembly with 8 inch amber poly roller aids in trailering of boat without harming boat's hull.

Tie Down Engineering's angle heavy duty angle brackets are used for all dock cross supports. All brackets are commercial grade.