SmartPlug

The LineGard™ PGFM product family provides ELCI (equipment leakage) ground fault sensing and is designed and manufactured by North Shore Safety, a leader in innovative safety products. The PGFM series operates in tandem with an Airpax™ LEL series, UL 489 listed circuit breaker, with shunt trip and auxiliary switch manufactured by Sensata Technologies.

The combined assembly of the PGFM and Airpax™ breaker meets the requirements of ABYC E-11 for ground fault protection and main shore power circuit protection. The PGFM constantly monitors the current balance of the conductors (wires / cables) supplying power to the load. When a ground fault of 27mA nominal (30mA max) occurs, the PGFM uses the LEL’s shunt trip coil to signal the breaker trip.

This kit includes one ELCI sensor and one breaker for 50 amp 125/250 volt systems, and both inlets are white non-metallic.

The LineGard™ PGFM product family provides ELCI (equipment leakage) ground fault sensing and is designed and manufactured by North Shore Safety, a leader in innovative safety products. The PGFM series operates in tandem with an Airpax™ LEL series, UL 489 listed circuit breaker, with shunt trip and auxiliary switch manufactured by Sensata Technologies.

The combined assembly of the PGFM and Airpax™ breaker meets the requirements of ABYC E-11 for ground fault protection and main shore power circuit protection. The PGFM constantly monitors the current balance of the conductors (wires / cables) supplying power to the load. When a ground fault of 27mA nominal (30mA max) occurs, the PGFM uses the LEL’s shunt trip coil to signal the breaker trip.

This kit includes one ELCI sensor and one breaker for 50 amp 125/250 volt systems, and both inlets are stainless steel.

This single 30 amp mounting bracket fits Eaton Lighthouse pedestals.

This single clear 50 amp mounting bracket is used to fit a legacy connector into the main mounting bracket on Eaton Lighthouse pedestals.

This single blank mounting bracket can be used to plug a hole on Eaton Lighthouse pedestals.

This single clear 30 amp mounting bracket is used to fit a legacy connector into the main mounting bracket on Eaton Lighthouse pedestals.

This 30 amp and 50 amp Eaton Lighthouse pedestal conversion kit includes (1) 30 amp SmartPlug Receptacle, (1) 50 amp SmartPlug Receptacle, 1 Main Mounting Bracket, (1) 30 amp SmartPlug Mounting Plate with Legacy Mounting Plate, (1) 50 amp SmartPlug Mounting Plate with Legacy Mounting Plate.

This kit includes all the hardware to repair or replace the side levers on an existing SmartPlug connector. Kit include (2) side levers, (2) 90-degree brackets, and (2) metal pins.

This kit includes gaskets for repairing a 16 amp SmartPlug female connector inlet.

This kit includes all the hardware to repair a 30 amp SmartPlug female connector inlet.

This kit includes gaskets for repairing a 30 amp SmartPlug female connector inlet.

This kit includes all the hardware to repair a 32 amp SmartPlug female connector inlet.